570 Display Tag Protocols
!570
displays the currently selected tag protocol.
Reader response:
ATA:<E,D> eGo:<D SeGo:D> IAG:D> EPC: D> Sort:<D TMM0
where
E
Enabled
D
Disabled
TMM0
Fixed
577 Report Buffered Handshakes
!577
reports the buffered handshakes.
Reader message:
XX
where
XX
the number of handshakes
Reader Control Functions
Group 6 commands set reader control functions such as reader ID, communication protocol, output pulse,
and RF control.
60NN Set Reader ID Number
!60NN
sets the reader ID that will be sent in the auxiliary data field (command !
311
). Uppercase or
lowercase characters are allowed for NN; for example, hex digits A though F or a
through f
where
NN = 00 to FF (hex for 0 to 255,
factory default = 00).
Reader response:
!Done
610 Select Basic Communication Protocol (Factory Default)
!
610
enables the basic communications protocol.
Reader response
!Done
611 Select Error Correcting Protocol
!
611
enables the error correcting protocol. For more details on Error Correcting Protocol,
contact TransCore technical support.
Reader response:
!Done
612NN Select Error Correcting Protocol Timeout
!612 NN
selects the timeout interval for ECP. This timeout applies to the transmission of tag,
report, and error messages and to the receipt of host commands. The transmit timeout
is initiated immediately after the end-of-message sequence CR/ LF is transmitted. If the
AI1422E Reader User Guide
TransCore Proprietary
6–42
