LED Master 64 manual
10
6 Press PROGRAM/REC button, all LEDs will blink 3 times and
then go out indicating the new step was inserted correctly.
7 Repeat steps 3-6 to insert more steps, 32 steps maximum, if this is exceeded
it will show “FULL”.
8 Hold PROGRAM/REC button for 3 seconds to exit programming mode,
the LED indicator above PROGRAM/REC will go off.
4.6 Delete Step from Chase
1 Enter programming mode.
2 Press CHASE 1-8 button, to choose the chase whose step you
desire to delete.
3 Press INSERT/TAP button, the LED indicator above it will light up,
the present step will show on the display (it will show “ST00” if no
step has been stored).
4 Press UP/DOWN button to choose the step desired to delete (If
you want to delete the fifth step, set the present display to “ST05”).
5 Press DEL/CLEAR button, all LEDs will blink 3 times and then go
out indicating it has been deleted successfully. (The steps behind it
will move forward one step, for example, if you delete
the fifth step, the sixth step will move to be the fifth step. If there
is no step behind the step deleted, it will show the last step.
Delete all steps, and then it will show “NULL”.)
6 Repeat steps 4-6 to delete more steps.
7 Hold PROGRAM/REC button for 3 seconds to exit programming