Create Two Partitions
Slide the
Disk-Volume
bar to adjust the size of
Disk1
to
fit your needs. The size of
Disk2
will be changed automatically according to the size of
Disk1
, as adjusted by the user.
JetFlash
can be setup to a
USB-ZIP
or
USB-HDD
boot-up mode as indicated below.
Option
Disk 1
Size
Disk 1
Configuration
Disk 2
Configuration
BIOS
1 >2
MB
Make USB-ZIP
startup disk
Blank USB-ZIP
2 >2
MB
Make USB-HDD
startup disk
Blank USB-HDD
Windows 2000 cannot recognize the second partition. Please download the Windows
2000 Service Pack 3 or later version from the Microsoft website and install it. Windows
2000 will then be able to recognize the second partition.
For Mac computers, only Mac OS 10.1.5 or later can recognize the partitions.
Even if two partitions are created, only
Disk1
can be recognized under the MS-DOS
prompt after booting up from
JetFlash
.
When
Enable password protection
option is selected,
Disk1
will be a public disk and
Disk2
will be a password-protected disk after format.
Option 1: Make an USB-ZIP startup disk
a. Select
Type of format
(Quick, Full or Configure device only) and slide the
Disk-Volume
bar to set the size of
Disk1
to fit your needs and
Disk2
will be
changed automatically according to the size of
Disk1
. Select
Make USB-ZIP
startup disk
on
Disk 1
. Click
Start
to continue.
12