Configuration
Slide the
Disk-Volume
bar to adjust the disk size of your
JetFlash
. You can make one disk
or two disks by adjusting the volume sizes. The options will change automatically and
enable your choice.
Make an USB-ZIP startup disk:
When the size of
Disk 1
is set to be larger than 2MB. This option can be chosen and it
can enable
JetFlash
to boot up the computer in USB-ZIP mode.
Format Utility
will
copy boot-up files onto
JetFlash
and set up startup information during formatting.
Make an USB-HDD startup disk: (Only for Windows 98SE)
When the size of
Disk 1
is set to be larger than 2MB. This option can be chosen and it
can enable
JetFlash
to boot up the computer in USB-HDD mode.
Format Utility
will
copy boot-up files onto
JetFlash
and set up startup information during formatting.
Enable password protection:
Choose this option to set up a password during formatting. If you format as two disks,
the
Disk 1
is a public disk and
Disk 2
will be password protected.
Create One Partition
Slide the
Disk-Volume
bar all the way down to set
Disk 1
size equal to the total capacity of
JetFlash
.
JetFlash
can be enabled to setup to an
USB-ZIP
or
USB-HDD
boot-up mode as
indicated below.
Option
Configuration
BIOS
1
Make USB-ZIP startup disk
USB-ZIP
2
Make USB-HDD startup disk
USB-HDD
9