-
7 -
Always close the camera lens cover of your
JetFlash
when not taking
pictures. This will conserve power and protect the camera lens.
Taking Pictures
1. Disconnect
your
JetFlash
from the USB port of your computer.
2. Open the lens cover to power on your
JetFlash
and verify the
Power LED
is solid (red).
3. Verify
the
Memory LED
is solid (green). (Available memory is over 100KB.)
4. Look though the viewfinder to frame your subject inside the window.
5. Keep
your
JetFlash
steady and press the shutter button all the way down to capture and store
your picture.
6. Your
JetFlash
will double beep after a picture is taken.
When you use your
JetFlash
for the very first time, you must charge the battery
approximately two (2) hours before taking pictures.
Pictures cannot be taken when your
JetFlash
is connected with your computer. When you
connect your
JetFlash
to your computer via the USB port, the computer operating system will
recognize your
JetFlash
as a USB Mass Storage Device.
The
JetFlash
image files are stored in JPEG format as below:
\DCIM\100-IMG\Img-xxxx.jpg
where xxxx is a JPEG file number (0001 to 9999)
When
the
Memory LED
is off, your
JetFlash
can only take one more picture at the most. To
free up storage space, you must transfer and store your pictures onto your computer.
