5
Setup
•
Please ensure that you connect the USB cable to the StoreJet 35 Ultra and your computer correctly
(square end
StoreJet 35 Ultra, rectangular end
PC or Notebook)
.
•
The supplied eSATA cable only works in eSATA ports and will not connect directly to your PC’s
internal motherboard SATA connector
•
When using the Vertical Stand, allow at least 2” clearance between your PC, wall, etc. and the
StoreJet 35 Ultra’s cooling fan.
•
When not using the Vertical Stand, always lay the StoreJet 35 Ultra on a flat stable surface with the
cooling fan side facing up.
•
Never set anything on top of the StoreJet 35 Ultra or cover the cooling fan inlet.
Backing Up Data
•
Transcend does NOT take any responsibility for data loss or damage during operation. If you
decide to store data on your StoreJet 35 Ultra we strongly advise that you regularly backup the data
to a computer, or other storage medium.
•
To ensure eSATA / High-Speed USB 2.0 data transfer rates when using your StoreJet 35 Ultra with a
computer, please check the computer has the relevant eSATA / USB drivers. If you are unsure on
how to check this, please consult your computer or motherboard User’s Manual for eSATA or USB
driver information.
Power
•
The StoreJet 35 Ultra is powered from your home’s power outlet using the included Power Adapter.
•
Ensure nothing is resting on the power cables and that the cables are not located where they can be
tripped over or stepped on.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove your StoreJet 35
Ultra from a computer.
