Use with a Computer
Use with a Computer
Driver Installation for Mac
™
OS 9.x
1.
Put the Driver CD into the CD-ROM drive and run the
Install
program located in the
Mac
folder on the
Driver CD. Follow the on-screen instructions to complete the driver installation.
2.
Plug the
Multi-Card Reader
into an available USB port.
3.
Insert a memory card into the
Multi-Card Reader
. A disk icon will appear on the desktop. After the icon
appears you can use the memory card as if it were a Hard Disk on your Mac
™
.
Figure 5. Mac Driver Installation
Driver Installation for Mac
™
OS 10.1.2, or Later
No drivers are required. Plug your
Multi-Card Reader
into an available USB port and your computer will
automatically detect it.
Figure 6. Mac Driver Installation
Driver Installation for Linux™ Kernel 2.4, or Later
No drivers are required. Plug your
Multi-Card Reader
into a USB port and mount it.
1.
First create a directory for the
CardReader
Example:
mkdir /mnt/CardReader
2.
Then, mount the
CardReader
:
Example:
mount –a –t msdos /dev/sda1 /mnt/CardReader
NEVER
Remove a Flash Memory Card from the Multi-Card Reader without first
Unmounting the device.
5
