Manual- Weighblok Rev 1 4-2-03
11
975 Deerfield Parkway
800-503-9180
Buffalo Grove, IL 60089
847-419-1515
Communication Port
The Weighblok has a Communication Port standard. It is possible to connect different accessories such as a Printer,
PC/Notebook or external relay.
Printer for the weight value.
Many printers in the market can be connected. For more information, contact Transcell.
PC/Notebook
The Scale can be connected to a PC/Notebook. For more information, contact Transcell.
External Relay
The scale can be connected to an external relay. A 5 V output is available to actuate a relay for cut-off control when filling or
discharging.
One time set up: F11 must be
“
1
”
and A5 must be
“
2
”
(normally done when delivered)
RS-232
PIN NUMBER
PIN NAME
2
RXD
3
TXD
5
GND
7
TARGET
TTL(+5V/OV)
8
TTL +5V
Set the target weight value:
1.
To set the Target Weight:
2.
Press,
”
Dot
”
for 5 seconds, display shows 0,0 (flashing).
3.
Press ON until the first relevant digit flashes.
4.
Change to the desired value with
”
Dot
”
.
5.
Press ON until the next relevant digit flash.
6.
Change to the desired value with
”
Dot
”
.
7.
When the Scale shows desired value, save with NET
8.
Press ZERO it the Scale not shows zero and put the object on the Scale. The Scale shows the gross weight.
9.
Batching: Press TARE. The Scale shows zero and the process begins.
10. When the weight difference on the Scale is same as Batching Weight the process stops.
11. The Scale shows the Batching Weight. Press NET/GROSS for gross weight.
