5
CONFIGURATION
OVERVIEW
The indicator contains two main configuration menus:
•
The Setup (“F”) menu, which configures and calibrates the indicator to your weigh platform
•
The User (“A”) menu, which configures the serial communication ports and enables some
user options
•
The Batching (“B”) menu, which configures the I/O for process control and checkweighing
functions
All menus consist of several menu selections, each with their own sub-menu of selections or
programming procedures. To configure the indicator you must first enter the appropriate menu mode.
Once there, four of the front panel keys become directional navigators to move around in the menus, and
one key is used to save or SET the selections.
ACCESSING THE MENUS
To access the Setup (“F”) menu:
1. Power off the indicator.
2. Locate the slide switch on the rear cover and move it to the opposite position.
NOTE: A metal plate conceals the slide switch; remove the two drilled-head screws and cover
plate to access the slide switch.
3. Power on the indicator.
The display shows “ PASS_” to indicate that you need to enter a password to access Setup Menu
mode.
4. Key-in the password (1397) and then press Enter key
The display shows ” F 1” to indicate that you are in Setup Menu mode.
To access the User (“A”) menu:
1. Power off the indicator.
2. Locate the slide switch on the rear cover and move it to the opposite position.
NOTE: A metal plate conceals the slide switch; remove the two drilled-head screws and cover
plate to access the slide switch.
5. Power on the indicator.
The display shows “ PASS_” to indicate that you need to enter a password to access User Menu
mode.
3. Key-in the password (1793) and then press SET (MODE) key
The display shows ” A 1” to indicate that you are in User Menu mode.
To access the Batch (“B”) menu:
1. Power off the indicator.
2. Locate the slide switch on the rear cover and move it to the opposite position.
NOTE: A metal plate conceals the slide switch; remove the two drilled-head screws and cover
plate to access the slide switch.
6. Power on the indicator.
The display shows “ PASS_” to indicate that you need to enter a password to access User Menu
mode.
3. Key-in the password (1234) and then press SET (MODE) key
The display shows ” B 1” to indicate that you are in Batch Menu mode.
