User Manual
17
Insert contact cable assembly into back of male and female connector. A
“click” should be heard or felt when the contact cable assembly is seated
correctly. See below figures.
Figure 4-17
Wrest the cap by using the torque of 2.6~2.9NM.
Figure 4-18
Step2
: Mate and separate Helios H4 connector:
After wrest the cap tightly, align the 2 half connectors and mate them together
by hand until a “click” is heard or felt.
Figure 4-19
When the separation of connector is necessary, use the Amphenol specified
