XT500C DELUXE PROGRAMMABLE HEAT-PUMP THERMOSTAT
5
69-1404
Pub. No. 18-HD25D2-2
Installer Setup Procedure
1. Press and hold the Information
, Increase
▲
,
and Decrease
▼
keys at the same time until all display
segments and the first setup number displays
(all display segments appear for approximately three
seconds before the setup number displays). See
Figs. 12 and 13.
M14559
Aux Ht
Set Day/Time
Set Program
Mon
Wake Leave Return
Sleep
Outdoor
Room
Filter
Wait
System
Fan
Em Heat
On
Auto
Off
Cool
Auto
AM
PM
Hold for
Heat Cool
Repl Batt
Recovery
DST
Tue Wed Thu Fri Sat Sun
Days
Temporary Setting
Em Ht
M14618
Comfort-R™
CONTROL
OFF
ON
AUTO ONLY
(SYSTEM
AUTOMATICALLY
SELECTS HEAT
OR COOL)
PROGRAMMING
OUTDOOR
TEMPERATURE
DISPLAY
SYSTEM
SETTING
(HEATING
AND
COOLING
SETTING)
CLOCK
FORMAT
TEMPERATURE
DISPLAY
COOLING
DROOP
Adaptive
Intelligent
Recovery™
CONTROL
(A HONEYWELL
TRADEMARK)
7-DAY
PROGRAMMING
NO OUTDOOR
TEMPERATURE
IS DISPLAYED
AUTO/MANUAL
(SYSTEM
AUTOMATICALLY
SELECTS
HEAT OR COOL;
YOU CAN
SELECT HEAT,
COOL OR OFF.)
24-HOUR
CLOCK FORMAT
FARENHEIT (
°
F)
ON
ON
24-HOUR
PROGRAMMING
NO OUTDOOR
TEMPERATURE
IS DISPLAYED
MANUAL ONLY
(YOU SELECT
HEAT, COOL
OR OFF.)
24-HOUR
CLOCK FORMAT
CENTIGRADE (
°
C)
OFF
OFF
(CONVENTIONAL
RECOVERY)
CONSTANT
TEMPERATURE
SETPOINT
PROGRAMMING
M17110
Figure 11. Customizing Your Thermostat chart,
from Owners Guide, Pub. No. 22-5128-02.
Fig. 12. Display of all the segments of the LCD.
IMPORTANT
Only configurable numbers display. Example: Installer Setup Number 1 does not display because it is not configurable.
Review the factory settings in Table 3 and make any desired changes in the Actual Settings column. When the Installer
Setup is complete, review the settings to confirm that they match the system and the boxes you checked in the
Customizing Your Thermostat chart located in the Owners Guide.
Table 3. Installer Setup Options for the XT500C.
(continued)
Fig. 13. Display of Installer Setup number and option.
—
To advance to the next Installer Setup, press Time
▲
.
—
To change a setting, press Increase
▲
or Decrease
▼
.
—
To scroll the Installer Setup numbers backwards, press
Time
▼
.
—
To exit the Installer Setup, press Run Program.
Press Time
▲
or
▼
Press Increase
▲
or Decrease
▼
to change setting
Installer
Factory Setting
Other Choices
Actual
Select
Setup Number
Display
Description
Display
Description
Setting
Programming
42
Press Time
▼
to bypass 3–41
and go directly
to setup #42
0
7-day programming
1 or 2
1—24-hour
programming
2—No programming
Number of
heating and
cooling stages
3
1
2 heating stages and 1
cooling stage (2H/1C)
2
3 heating stages and
2 cooling stage
(3H/2C)
Compressor 1
heating cycle rate
4
3
3—3 cph recommended
5, 6, or 9 cph not
recommended
5, 6, or 9
5—5 cph
6—6 cph
9—9 cph
Compressor 2
heating cycle rate
5
3
3—3 cph recommended
5, 6, or 9 cph not
recommended
5, 6, or 9
5—5 cph
6—6 cph
9—9 cph
Auxiliary heating
cycle rate
6
5
5—5 cph recommended
3, 6, or 9 cph not
recommended
3, 6, or 9
3—3 cph
6—6 cph
9—9 cph
