VAV-SVX01C-EN
39
UCM Programming and Operation
Setup Tab
The following are descriptions of each line on the
Setup
tab. To make changes: Select the
Configure
button in Rover and select the
Setup
tab. Make adjustments if necessary by opening
a drop down arrow or changing a value and press the
download
button.
Other Fields
Unit Type:
Select the proper unit type. The unit type information is maintained in the
controller's EEPROM.
Important:
Edit the unit type BEFORE editing any items on the above list!
Unit types available for all versions:
•
VariTrane C
•
VariTrac - Round
•
VariTrane D
•
Generic
Unit types available for VAV version 4.0 and above:
•
Bypass Damper - Round
•
Bypass Damper - Rectangular
•
VariTrane F - Round
•
VariTrane F - Rectangular
•
VariTrac - Rectangular
Editing the unit type also affects the following entries:
•
Heat type (The default is none)
Figure 24. Setup tab
Summary of Contents for VAV-UCM 4.2
Page 1: ...May 2010 VAV SVX01C EN Installation Operation Maintenance VAV UCM 4 2...
Page 81: ...VAV SVX01C EN 81 Troubleshooting Figure 46 Single duct with single phase voltage electric heat...
Page 82: ...82 VAV SVX01C EN Troubleshooting Figure 47 Single duct with three phase voltage electric heat...
