Backlite/Display
The Backlite/Display screen is used to set the backlight time-out and contrast.
Backlite Timeout is the time (in seconds) from the last button press to the backlight going out. The time-out can be set between
zero (0) and one hundred and twenty (120) seconds. Thirty (30) is the default setting. When set to zero (0), the backlight will remain
always on.
Contrast sets the contrast level of the LCD display. The contrast can be set between zero (0) and twenty (20). Ten (10) is the default
setting. If the display is too light, using a higher number. If dark lines appear in the display, use a lower number.
Backlite/Display
Backlite Timeout
60
Contrast
10
Done
+
-
Adjust the Backlight
Press the
1.
MENU
button.
Scroll to
2.
User Settings
and press the
Selec
t
button.
Scroll to
3.
Backlite/Display
and press the
Select
button.
Scroll to
4.
Backlite Timeout
.
Press the plus (
5.
+
) or minus (
-
) buttons to change the number of seconds.
The backlight time-out can be set between 0 and 120 seconds. Thirty (30) is the default setting. When set to Zero
Î
(0), the backlight will remain always on.
Adjust the Contrast
Press the
1.
MENU
button.
Scroll to
2.
User Settings
and press the
Select
button.
Scroll to
3.
Backlite/Display
and press the
Select
button.
Scroll to
4.
Contrast
.
Press the plus (
5.
+
) or minus (
-
) buttons to change the contrast value.
The contrast can be set between 0 and 20. Ten (10) is the default setting.
Î
26
