MCXE-IOM
29
Wired Remote Controller
7. Reattach the wire controller’s upper part
Insert a flat screwdriver into the slots in the lower part of the
wired controller (2 places). Remove the upper part of wired
controller.
1. Dimensional
5. Fasten the wired remote controller back plate
2. Wiring diagram
6. Wire the indoor unit:
There are three methods
3. Wiring figure
4. Wired remote controller upeert part remove
PCB
1) from the rear.
2) from the bottom.
3) from the top.
Wired
Remote
Controller
Indoor Unit
Mainboard
Wiring connection diagram
Red
Black
Yellow
Brown
Red
Black
Yellow
Brown
Insert of the
mainboard CN40
4-Core Shield Cable,
the length is decided by installation
For surface mounting, fasten the back plate on the wall with
the 3 screws (M4x20) and plugs.
While adjusting and mounting the upper case, avoid clamping
the wiring during installation.
Summary of Contents for TTKE12SB5EAA
