58
PKG-SVX027C-EN
TD-7 Reports
Unit Status Report
The Unit Status report provides an overview of how the
unit is running and includes all available points that
were pre-defined for the unit.
To access the Unit Status report:
1. Press the R
Re
ep
po
orrttss button at the bottom of the
screen.
2. Press U
Un
niitt S
Stta
attu
uss button.
Use the up and down arrows in the bottom right to
scroll through the report.
Figure 40.
Unit status report
All Points Report
The All Points report provides details for all points for a
unit. To access the All Points report:
1. Press the R
Re
ep
po
orrttss button at the bottom of the
screen.
2. Press the A
Allll P
Po
oiin
nttss R
Re
ep
po
orrtt button.
Use the up and down arrows in the bottom right to
scroll through the report.
Figure 41.
All points report
Starting the Unit
Before starting the unit, ensure that:
•
All checks are complete
•
Alarms are cleared
•
Compressors that you want to run are made
available or locked out.
Local Auto/Stop Value
The Local Auto/Stop Value is used to stop by unit in a
safe manner either locally in Tracer TU or at the TD-7
display. The factory default is set to A
Au
utto
o.
1. Navigate to the Home screen.
2. In the upper left tile, press the arrow next to either
S
Stto
op
p or A
Au
utto
o.
3. To stop the unit, press the S
Stto
op
p button, or to put
the unit in Auto default mode, press R
Re
elle
ea
asse
e
O
Ov
ve
errrriid
de
e.
Figure 42.
Local Auto/Stop
Figure 43.
Stop or release override
Setpoint Adjustments
This section details control setpoints that can be
modified from factory defaults and how to modify
those setpoints.
