S8XB-SVX001-1A-EN
35
Horizontal Right and Downflow Furnace — no Coil
Important:
A BAYBASE is required when installing the furnace on a combustible floor.
Refer to
IIn
nsstta
alllla
attiio
on
n IIn
nssttrru
uccttiio
on
nss
1. Bend furnace flanges up.
2. Bend furnace side flanges down.
3. Set the coil on top of the furnace.
4. Support the furnace and coil independently.
5. Screw through the coil cabinet into the furnace
flange. Guide holes are located on the coil.
6. Attach ducting.
7. Seal per local codes and requirements.
