background image

Trane
A business of American Standard Companies
www.trane.com

For more information contact your local 
district office or e-mail us at [email protected]

Literature Order Number

Date

Supersedes

Stocking Location

Trane has a policy of continuous product and product data improvement and reserves the right to
change design and specifications without notice. Only qualified technicians should perform the
installation and servicing of equipment referred to in this publication.

RTWB-SVN01B-E4

1003

RTWB-SVN01A-E4_0801

Europe

Société Trane – Société Anonyme au capital de 61 005 000 Euros – Siège Social: 1 rue des Amériques –
88190 

Golbey – France – Siret 306 050 188-00011 – RSC Epinal B 306 050 188

Numéro d’identification taxe intracommunautaire: FR 83 3060501888

Maintenance Contract

It is strongly recommended that you
sign a maintenance contract with
your local Service Agency.  This
contract provides regular
maintenance of your installation by
a specialist in our equipment.
Regular maintenance ensures that
any malfunction is detected and
corrected in good time and
minimizes the possibility that
serious damage will occur.  Finally,
regular maintenance ensures the
maximum operating life of your
equipment.  We would remind you
that failure to respect these
installation and maintenance
instructions may result in immediate
cancellation of the warranty.

Training

The equipment described in this
manual is the result of many years
of research and continuous
development.  To assist you in
obtaining the best use of it, and
maintaining it in perfect operating
condition over a long period of time,
the constructor have at your
disposal a refrigeration and air
conditioning service school.  The
principal aim of this is to give
operators and maintenance
technicians a better knowledge of
the equipement they are using, or
that is under their charge.  Emphasis
is particularly given to the
importance of periodic checks on the
unit operating parameters as well as
on preventive maintenance, which
reduces the cost of owning the unit
by avoiding serious and costly
breakdowns.

Summary of Contents for RTWB Helical-Rotary









































Reviews: