GANE-SVX001B-EN
5
Description
NOTICE
It is the equipment owners responsibility to provide any
scaffolding or other apparatus required to perform
emergency service or annual/periodic maintenance to
this equipment.
The Separated Combustion Tubular Gas Fired Unit
Heaters are a factory assembled, power vented, low static
pressure type propeller fan unit heaters designed to be
suspended within the space to be heated. THESE
HEATERS ARE NOT TO BE CONNECTED TO DUCTWORK.
The designs are certified by ETL as providing a minimum
of 83% thermal efficiency, and approved for use in
California. Do not alter these units in any way. If you have
any questions after reading this manual, contact the
manufacturer.
Figure 1.
Separated combustion tubular propeller unit heater
For Identification of Parts, see
-
Figure 23
.
The following terms are used throughout this manual, in
addition to the ETL requirements to bring attention to the
presence of potential hazards, or to important information
concerning the product:
WARNING
Indicates an imminently hazardous situation which, if
not avoided, could result in death, serious injury, or
substantial property damage.
CAUTION
Some Indicates an imminently hazardous situation
which, if not avoided, may result in minor injury, or
property damage.
NOTICE
Used to notify of special instructions on installation,
operation, or maintenance which are important to
equipment but not related to personal injury.
For Your Safety:
The use and storage of gasoline or
other flammable vapors and liquids in open containers in
the vicinity of this appliance is hazardous.
For Your Safety:
If you smell gas:
1. Open windows.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately contact your gas supplier.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury, or
death. Read the installation, operating, and
maintenance instructions thoroughly before installing
or servicing this equipment.
WARNING
Install, operate, and maintain unit in accordance with
the manufacturer's instructions to avoid exposure to
fuel substances, or substances from incomplete
combustion, which can cause death or serious illness.
The state of California has determined that these
substances may cause cancer, birth defects, or other
reproductive harm.
Installer's Responsibility:
Installer Please Note: This
equipment has been test fired and inspected. It has been
shipped free from defects from our factory. However,
shipment and installation problems such as loose wires,
leaks, and loose fasteners may occur. It is the installer's
responsibility to inspect and correct any problem that may
be found.
Receiving Instructions:
Inspect shipment immediately
when received to determine if any damage has occurred to
the unit during shipment. After the unit has been uncrated,
check for any visible damage to the unit. If any damage is
found, the consignee should sign the bill of lading
indicating such damage and immediately file claim for
damage with the transportation company.