Dynamic setpoint ver. 2
The dynamic setpoint view. X-axis: outdoor temperature, Y-axis: flow temperature.
Pos.
Item
Description
1
Setpoint
Setpoint calculated based on the current outdoor temperature
(or process temperature) and curve point values
2
Operating mode curve
selection
Select which side’s (in the figure: primary/Heat or secondary/
Chill) values to change.
3
Minimum outdoor temperature Minimum outdoor temperature limit (can be adjusted)
4
Current temperature
Current measured outdoor temperature
5
Maximum outdoor temperature Maximum outdoor temperature limit (can be adjusted)
6
Outlet temperature values for
each outdoor temperature
Tap to adjust each value.
The values along the X-axis each indicate a specific outdoor temperature point. To
specify an outlet (flow) temperature for a given outdoor (or process) temperature point,
tap on the white box above the temperature point (Pos. 6 in the figure.)
The applicable temperature range can be changed by changing the temperature values
along the X-axis. To change a temperature value (temperature point), tap on the value.
Timed setpoint
The
Timed setpoint
view allows users to temporarily force a setpoint for either side
for a specific day and duration. Additionally, the
On
buttons along the top edge of the
screen can be used to apply a (temporary) setpoint for the primary side, the secondary
side, or both.
EXERE01 2150EN
45 (61)
