Trane CFEA 04 CEM1, Owner'S Manual

Page: 6 / 16

6
UNT-SVU001-EN
Indicators on Infrared
Remote Control
System Operating
Selection
FAN Only System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
system operating mode, FAN mode
will be shown on the display.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
COOLING System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
COOL operating mode, “COOL”
mode will be shown on the display.
- Press either TEMP or TEMP
button to set the desired room
temperature. Temperature set
range is 18
O C to 30 O C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
1. Clock
Displays the current time.
2. Timer START
The time set for timer on operation
is indicated.
3. Timer STOP
The time set for timer off operation
is indicated.
4. Transmission Indicator
This transmission indicator lights
when remote control transmits
signals to the indoor unit.
5. SLEEP Mode
Displayed by pressing the SLEEP
button. Press the SLEEP button
again to disappear.
6. Temperature Setting
Displays the temperature setting
(18
O
C to 30
O
C) When setting the
operation mode to FAN only,
no temperature setting is displayed.
7. Fan Speed
Displays the selected fan speed.
Fan speed level, low (LOW),
medium (MED), high (HIGH),
auto (AUTO) will be indicated.
8. System Mode
Displays the current operation
mode. In cooling only (FAN, COOL
or DRY). In cooling and heating
system (FAN, COOL, DRY or
HEAT).
FAN
COOL
DRY
HEAT
START
STOP
HIGH
MED
LOW
AUTO
1
2
3
4
5
7
6
8
HEATING System Operation
(Heating/Cooling Models)
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
HEAT operating mode, “HEAT”
mode will be shown on the display.
- Press either TEMP or TEMP
button to set the desired room
temperature. Temperature set
range is 18
O C to 30 O C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
AUTO System Operation
(Heating/Cooling Models)
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
AUTO operating mode, “AUTO”
mode will be shown on the display.
- Press either TEMP or TEMP
button to set the desired room
temperature. Temperature set
range is 18
O
C to 30
O
C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
- The system will automatically
switch between cooling mode and
heating mode to maintain desired
temperature setting.
DRY System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
DRY operating mode, “DRY” mode
will be shown on the display.
- Press either TEMP or TEMP
button to get the desired room
temperature setting at the
indication. Temperature set range
is 18
O C to 30 O C.
- The system automatically cycle the
compressor and fan (low speed) to
remove moisture from the air
without overcooling the room.