background image

UNT-SVU001-EN

13

Note: 

Once the air filter is washed,

dry it completely before returning it
to its original position.
After cleaning, be sure to return it to
its original position.

Cautions

- Do not wash the air filter in water

that is over 40

0

C or it may shrink.

- Do not expose the air filter to fire.
- Do not expose the air filter to direct

sunlight for a long time.

- Clean the air filter more frequently

when the air is very dirty.

Maintenance

Regular Maintenance

Be sure to disconnect the power
before inspection or maintenance of
air conditioner.

1. Cleaning the air filter

Air flow is reduced and cooling
efficiency impaired if the filter is
clogged. Be sure to clean the
filter every two weeks during the
cooling season.

1.1 How to remove the air filters

- Remove each return air grille

by pushing down and pulling
forward

- Remove each air filter frame

from the return air grille

1.2 How to clean the air filter

Wash away dust from the air
filter with clean water or
vacuum it with an electric
vacuum cleaner.

Pull

Pull

Pull  Upward

2. Cleaning the front panel

Do not pour water directly on the
front panel to clean it. Dust or wipe it
lightly with a soft cloth. If it is very
dirty, use a soft cloth soaked in water
or neutral detergent.

Cautions

- Do not use water over 50

0

C to

clean the front panel or it may
become discolored.

- Do not use benzine, gasoline,

thinner, polishing compound,
machine oil, etc. when cleaning
the front panel, or paint may peel
off, or it may become deformed
or damaged.

3. Maintenance before

prolonged idle period

- Operate the fan for about half a day

to dry the inside of the unit.

- Stop the air conditioner and

disconnect the power by turning off
the safety breaker.

- Clean the air filter and return it to its

original position.

- Place the protective cover over the

condensing unit.

- Outdoor unit internal components

must be cleaned periodically.

Summary of Contents for CFEA 04 CEM1

















Reviews: