4
Installer’s Guide
3b. 2/4WC** and 4TC** Units
230 Volt Single Phase 2/4WC** units WITHOUT
Start Kit, All 4TC** units & 230/460 Volt Three
Phase 2/4WC** Units except for 2/4WC*3060A4 &
460 Volt 4WCZ6 units
Note:
Use the Universal Bracket shipped in the Low
Ambient kit. Mount the Control Module to the Universal
Bracket as needed so that the assembly matches the
illustration below.
Figure 4. 230 Volt Single Phase 2/4WC** units WITHOUT Start Kit, All 4TC** units &
230/460 Volt Three Phase 2/4WC** units except for 2/4WC*3060A4 & 460 Volt 4WCZ6 units
Mount Universal
Bracket to back
wall of Control Box
with two (2)
Sheetmetal Screws
(horizontally)
Control Box
Mount Universal
Bracket to Control
Box with one (1)
Sheetmetal Screw
(vertically)
Control
Module
Universal
Bracket
1.
Mount the Control Module and Universal Bracket assembly
bracket to the back of the control box with two (2)
sheetmetal screws inserted horizontally. Also, mount the
Universal Bracket to the bottom of the control box with one
(1) sheetmetal screw inserted vertically.See Figure 4.
2.
Continue with step
4, Mounting the Liquid Line Sensor
,
page 7.
