Figure 20.
Attach connecting rods
Installation
10
ACC-SVN155D-EN
6. Attach return duct cover 7 to Trane return air inlet.
Figure 21.
Attach return duct cover
7. If barometric or power exhaust is not installed, attach
block-off plate 8 to Carrier return air inlet.
Figure 22.
Attach block-off plate
8. Attach Filter and Rear access panels.
Mist Eliminator Servicing
1. Remove screws from end panel that secure it to the
unit and economizer.
2. Set end panel aside.
3. Remove mist eliminator brackets.
4. Remove mist eliminators and clean.
5. Reinstall and secure the mist eliminator brackets.
6. Reinstall end panel and secure to unit and economizer.
Figure 23.
Mist eliminator removal
Mist Eliminator
Mist Eliminator Bracket
