SSP-PRC001-EN
5
Features and Benefits
Odyssey’s air handler versatility is
further increased by a complete line
of accessories designed to match and
install smoothly:
•
Discharge Plenum and Grille
•
Return Grille
•
Subbase
•
Electric Heaters
•
High Static Evaporator Motor
•
Isolators both Rubber-in-Shear
and Spring Type
•
A full line of Thermostats
•
Outdoor Thermostat
Figure 3.
Odyssey — A Complete
Split System
Odyssey delivers the flexibility to
select a complete system that meets
your particular job requirements.
Air handlers are designed, tested and
rated with outdoor units to let you
select the proper match between
capacity and load. Also, these
matched systems can be quickly
engineered for specific applications
using Trane’s computerized selection
and load programs.
Odyssey Lowers Installation Costs
Your installation costs are reduced
with Odyssey Split. Both outdoor
units and air handlers are factory
packaged and assembled so jobsite
installation is quick and easy. You get
a complete system, with all the
components, controls and the
internal wiring, factory-installed for a
smooth jobsite start-up.
Unlike some competitive models the
following components are factory-
installed in Trane air handlers:
•
Single Point Power Entry
•
Blower Wheel and Housing
•
Evaporator Motor with Sheaves
and Pulleys
•
Low Voltage Terminal Board
•
Transformer
•
Contactor
•
Fan Relay
•
DX Coil with complete
Refrigeration Circuitry
•
Expansion Valve and Check
Valves
There’s no need to install
components and put together the air
handler on the job. This provides you
with less labor cost and fewer
chances for installation errors which
cause callbacks. All this means
saving you money both in
replacement and new construction
applications.
Figure 4.
