Trance Audio THE AMULET M User Manual Download Page 2

   

2   

 

THE AMULET M

™ 

 

Dual-Mono Guitar Pickup System User Guide  
© 2012-2013 Trance Audio, Inc.™ All Rights Reserved 
Trance Audio, Inc., P.O. Box 256, Santa Cruz, CA 95061  
Tel: (831) 688-9699   email: [email protected]

 | 

www.tranceaudio.com 

 

Warranty 

This warranty covers all defects in materials and workmanship for a period of one 
year from the date of purchase by the original owner. Cases may arise where our 
Service Department or one of Trance Audio's authorized service centers will ask 
for a copy of your sales receipt to facilitate warranty service. Please keep your 
purchase receipt in a safe place. 

Trance Audio

 does not cover: 

• Damages due to improper or inadequate maintenance, accident, abuse, 
misuse, alteration, unauthorized repairs, tampering, or failure to follow normal 
operating procedures as outlined in the owner’s manual. • Deterioration or 
damage of the cabinet. • Damages occurring during any shipment of the product 
for any reason. • Any product that has been modified by anyone other than 
Trance Audio, Inc. 

Limitation of Implied Warranties 

No warranty is expressed or implied. Trance Audio specifically disclaims the 
implied warranties of merchantability and fitness for a particular purpose. 

Exclusion of Certain Damages 

Trance Audio’s liability for a product found defective is limited to repair or 
replacement of the unit, at our option. In no event shall Trance Audio be liable for 
damages based on inconvenience, whether incidental or consequential, loss of 
use of the unit, loss of time, interrupted operation or commercial loss, or any 
other consequential damages. 
Some states do not allow limitation of the duration of implied warranties or the 
exclusion or limitation of incidental or consequential damages, so the above 
limitations and exclusions may not apply to you. 

How To Obtain Warranty Service 

All Trance Audio products are manufactured with the highest standards of 
quality. If you find that your transducer or preamp does require service, it may be 
done by an authorized Trance Audio service center. Please contact Trance Audio 
at (831) 688-9699. We will either refer you to an authorized service center or ask 
that you return your transducer or preamp to the factory. When returning a 
product to the factory, you will be issued a Return Authorization number. Please 
label all cartons, shipping documents and correspondence with this number. 
 

CAUTION 

Trance Audio recommends that Acoustic Lens

 and Amulet M™ 

installation be done by a professional luthier or guitar repair technician. 

 

Installers: Please read the following instructions carefully, and 
please contact us by phone or email with any questions. We will not 
be responsible for any damage to the guitar or personal injury 
resulting from installation of this product.

  

 

 

Summary of Contents for THE AMULET M





















Reviews: