Trance Audio THE AMULET M, User Manual, Page: 11 / 20

11
The Amulet M can be installed to accommodate having the
Thumbwheel Controls on either side of the soundhole
. This allows
setup for either right or left handed players, or allows you to make the
choice to have the controls visible to you while you’re playing (allowing
you to, for example, place favorite settings markers or dots on the
Thumbwheels), or hidden from view on the opposite side of the
soundhole.
The Amulet M preamp should be installed in the instrument with the EXT
jack facing the side of the guitar where the Thumbwheel Controls are
going to be installed.
NOTE : The cable that connects to the EXT jack has a keyed design
so that it only plugs in correctly with the plug oriented in ONE
DIRECTION
. If you look at the side of the small black plugs on the
connector cable, you will see a small ridge on either side of the plug,
closer to one side than the other. If you look closely at the connector
(either the Amulet M EXT jack or the connector on the soundhole
Thumbwheel controls) that it plugs into, you’ll see a slot cut into each
side, that will mate with the ridges on the connector, but ONLY WHEN IT
IS PLUGGED IN CORRECTLY. This is called a polarized connector, and
it insures that all of the cable wires get hooked up correctly during
installation. Make sure the two are lined up correctly, and don’t try to
force the plug in. If it won’t go, this would be the probable reason!