Trance Audio THE AMULET M, User Manual, Page: 14 / 20

14
Installing Your Amulet M Preamp/Endpin
PLEASE NOTE: For installation of the Amulet M endpin jack, the endpin
jack hole needs to be a standard size of 1/2”.
If your instrument does not
already have an endpin jack hole, this must be performed by a
professional luthier or an experienced guitar repair technician as
damage
to your guitar can result if done incorrectly.
The Amulet M's endpin can accommodate an endblock depth up to 7/8".
This isn't an issue for most modern guitars, but some older instruments
may have thicker endblocks. If needed, you can check the endblock
depth yourself. While looking in the endblock hole, insert a piece of stiff
but flexible wire of any sort (like an old guitar string) and look to see
when it reaches the inside end of the endblock. Mark the part of the wire
that is flush with the outside the endblock hole with a marker or a piece
of tape, or bend it at a right angle to the body of the guitar so when you
remove the wire from the endblock hole, you can clearly see the depth
and measure with it with a ruler. If you find your endblock is thicker than
7/8", Trance Audio can supply you with a specially-designed preamp with
an externally wired endpin that can accommodate an endblock up to
1 1/32" depth. Please contact us for details and cost. If your endblock is
thicker than 1 1/32", you will need to contact a luthier to get the endblock
internally counterbored to an appropriate depth.