Tramontina RC33B, User And Maintenance Manual

Page: 17 / 28

17
English
17
English
It is recommended that only original parts be used when replacing parts.
MAINTENANCE TABLE
ITEM MAINTENANCE
Before
each use
FREQUENCY
5 h 50 h
Screws, Nuts and Bolts Inspect/Tighten X
Fuel Hoses Inspect X
Fuel Filter Inspect/Replace X
Air Filter Clean/Replace X
Spark Plug
Inspect/Clean/Check-
Adjust/Replace
X
Muffler Clean X
Cooling System Inspect/Clean X
Gearbox Lubricate X
Cutting Parts Inspect/Replace X
BASIC SAFETY RULES
Always shut off the brushcutter and wait for the cutting mechanism to fully stop before doing any
maintenance, cleaning, transporting, storing or adjusting of the device.
Do not allow anyone unfamiliar with the brushcutter to use it without first reading the instruction manual.
Keep hands and feet away from the cutting mechanism when turning on device.
Avoid unsafe conditions. Do not use the brushcutter under humid or wet conditions.
Never fill with fuel while the engine is running.
Shut off the engine and let it cool down for at least 2 minutes before opening the fuel tank.
Gasoline and gasoline fumes are extremely inflammable and explosive. Fire or an explosion can cause
serious burns and even death.
Only use the device outdoors. Do not use or turn on the device in enclosed areas, even if windows and doors
are left open. Engines release carbon monoxide, a scentless and colorless gas.
Inhaling carbon monoxide can cause nausea, fainting and even death.
Do not use the brushcutter in the rain. Always use it during daylight or with good lighting conditions.
Keep children and animals away from the brushcutter when it is in operation. Everyone, especially children,
should keep a safe distance from the work area. Do not allow children to use the brushcutter.
Do not force the brushcutter. The equipment will work best and in the safest manner if it is used as intended.
Keep the brushcutter out of the reach of children when not in use.
Do not take risks; keep both feet firmly on the ground to maintain your balance.
Wear suitable clothing. Do not wear loose clothing or jewelry as they can get caught in the machine’s
moving parts.
Use safety glasses, ear protectors, gloves and closed-toe shoes.
Use the brushcutter properly. Do not use it for any purpose other than for what it was intended.