COMPATIBLE COOKWARE
This induction cooktop will only work with cookware with a magnetic bottom. If a magnet sticks to
the base of the cookware, it can be used.
Glass, ceramic, aluminum, copper and other non-magnetic cookware are not compatible and
cannot be used.
Cookware must have a flat bottom with a diameter between 4.75 – 7.75 inches (12.06 – 19.68 cm)
To avoid damage/scratches to the cooktop surface, always lift the cookware (do not slide) to move
to avoid scratching the cooktop.
CLEANING AND MAINTENANCE
Do not use a steam cleaner to clean this appliance, as steam could penetrate electrical components
and cause a short circuit.
Before cleaning, switch off the cooktop and allow the surface to cool completely. Disconnect the
power plug from the power outlet.
Over time, the air inlet/air outlet opening may accumulate dust and debris and should be cleaned
with a soft dry cloth or brush, compressed air or small vacuum cleaner.
To clean, wipe the cooktop surface with a soft moist cloth with mild detergent. Wipe away any
remaining detergent and dry thoroughly.
A glass cooktop cleaner, available in the cleaning sections of most grocery, discount or hardware
stores, may be used for stubborn spills.
When not in use, unplug the cooktop.
NOTE: Do not rinse under running water or immerse in water.
TROUBLESHOOTING
If an error code appears on the LED display, please refer to the table below before proceeding.
Problem
Check Points
After plugging in the power cord and
pressing the “Power” key, the indicator
and display do not light up.
• Is the power plug properly connected?
• Is the switch, power outlet, fuse or power cord damaged?
The “Power” indicator lights up and
the display works normally, but heating
does not start.
• Are you using the proper cookware?
• Is the appliance in a Level Mode status?
• For other causes, please contact Tramontina’s Customer
Service Department.
Heating suddenly stops during the
cooking process.
• Is the temperature of the oil too high when frying food?
• Is the temperature of the work area very high?
• Is the air inlet or air outlet of the cooktop blocked?
• Is the default heating time of the cooktop completed?
• The self-safety protection may have activated, therefore,
wait for several minutes and reconnect power.
Error Code
Solutions
E3 E6
Wait a moment and press the “Power” button. When the
temperature of the cooktop becomes normal, the cooktop
will operate as usual.
E7 E8
Turn off the cooktop. When the voltage becomes normal, turn
on the cooktop and it will operate as usual.
E1 E2 E4
E5 Eb EC
Please contact Tramontina’s Customer Service Department
for assistance.
- 10 -
Summary of Contents for 81500/100
Page 13: ...MADE IN...
