3 |
P a g e
A: Installation - Above Ground Tank
FluidSecure LINK is designed to work with virtually any electrically operated
dispenser, pump or solenoid. There are a large variety of dispensing systems and
electrical connections and methods of connecting such devices together. It is not the
intention of this manual to cover all possible combinations of connections. This manual
will cover a “typical” installation however the installer should be sufficiently proficient in
all aspects of dispensing systems to be able to understand how a FluidSecure should be
installed and to make sound judgments on how to modify a typical installation to suit the
needs for any configuration that may and will be different from a typical one explained
here.
1) Conduit Connections between Pump and LINK
The FluidSecure kit contains the conduit fittings, bodies and connectors to install the
FluidSecure LINK into a typical dispenser/pump. A typical installation for an above
ground tank will look similar to the picture below.
Trak supplied pulser (optional) FluidSecure LINK
