150XRS Set up instruction
7
2.
Assembly
2.1 Assemble the rear shocks (pic.17): take down the bolts from the
shocks, lift the rear swing arm to let the top of shock into the fixing seats
of frame, use 37-44NM torque to fix the shocks attached the frame. (Note:
1NM = 0.74 lb ft)
Pic.17
2.2 Assemble the rear wheels (pic.18): screw the castle nut M16x1.5
tightly with 98-103NM, then open the cotter pin 3X40 for fixing, take
down the nuts on the rear axle hub, lift the frame to install the wheel
(please pay attention to the right direction of wheel installation as shown
in the pic. 18), screw the tire nuts tightly with torque 37-44NM, cover the
hub cover.
Pic.18
