150XRS Set up instruction
14
2.18 Assemble the rear fender (pic.33): take down the M8x45 bolts from
the fender bracket, assemble the rear fender, screw on the bolts with
torque 22-29NM.
Pic.33
2.19 Assemble the yellow flag and flagpole: use the plastic bolt and nut to
fix the flagpole on the rear cargo rack.
2.20 Install the battery, battery cover: put the battery liquid into the
battery body, close the battery cover. Put the cushion plate into the battery
mount box. Connect the battery wires to the battery poles “+ to +; - to –”,
cover them. Put the wired battery into the battery mount box covered with
the plastic protection cover, put the wires out through the protection cover
slot, fasten the battery with battery strap. (Note: because the battery liquid
and wiring of battery poles are dangerous, only experienced adult can
carry out this carefully with protection measures (protective glove,
Prevent electric screwdriver).
