www.TrailFX.com
Page
3
of
6
Rev 070119
Passenger/right Side Installation Pictured
(5-A) Select Insert Tool and (1) Insert. Thread Insert
onto end of Insert Tool. Hand tighten only, do not
tighten hex bolt
(5-B) Firmly hold assembly and push Insert into
drilled hole.
(5-C) Use a wrench (open or box end) to hold nut
(arrow) to prevent nut and tool from turning. Hold
Tool Assembly up tight in body panel. Turn hex bolt
in Tool clockwise to expand insert in body panel.
Remove Tool once Insert is fully tightened. Do not
overtighten or Insert may be damaged. Repeat steps
for all Insert installations
(Fig 3) Do not drill these (3) mounting locations.
NOTE: The (3) mounting locations can be
accessed from between body panels
(Fig 5) Assemble Threaded Insert Tool
(Fig 4) Drill 25/64 hole in body panel at (7)
locations (arrows). NOTE: These locations
are not accessible from back of body panel
(Fig 6) Passenger/right front insert fully installed
(lower arrow) and next to drill (upper arrow)
Front
Front
Front
