www.TrailFX.com
Page
5
of
8
Rev 091620
Driver Side Installation Pictured
12mm x 35mm Hex Bolt
(2) 12mm Flat Washers
12mm Lock Washer
12mm Hex Nut
(Also attaches the Bull Bar to
the Mounting Bracket)
Installation pictured without the
splash guard for illustration
(Fig 6) Driver side mounting location pictured from
behind bumper on tow hook equipped model
Front
Remove the (2)
factory hex nuts
(Fig 7) Driver side Support Bracket in "with tow
hook" position. Line up Bull Bar Bracket between
Mounting Bracket and Support Bracket
Front
Attach each Tube Bracket to
the end of the Bull Bar with:
(2) 8mm x 35mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
(Fig 8) Bull Bar Tube Bracket
Fig 9
(1) 10mm x 35mm Hex Bolt
(2) 10mm Flat Washers
(1) 10mm Lock Washer
(1) 10mm Hex Nut
