5
Using the trigger cable:
Utilising the trigger cable enables
the
Channel 1 camera
to be
automatically
display
ed when
reverse gear
etc.
is engaged.
1. Connect the
trigger cable
ring-shaped connectors to the fuse
/
electrical circuit
of the re
versing lights.
2. Connect the other end of the trigger cable to the monitor.
3. Turn on the monitor and
select reverse gear (with ignition turned on)
.
4. The screen should
display
the image of the
vehicle
rear view
automatically. If it doesn’t,
please refer to the 'Pairing Camera(s)' section, to
pair the camera to the monitor.
Note:
If
[NO SIGNAL]
is displayed
on the monito
r, at any time while
reversing, immediately stop the vehicle, until the image is displayed, or it
is safe to continue.
With battery pack (
available separately
)
:
1. Attach the camera to the battery.
2.
Fix
the camera and the battery
to
the vehicle.
3. Press the power button
,
on the battery pack
,
to power the camera.
