Towbar Fitting Instructions
To Suit
MAZDA CX-9 TC CL4
Part Number
QTMA660L
Rating
2000/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 7 Issue Date: 24-01-2017
18. Fit the crosstube to the side arm and loosely
secure with 3 x M12 x1.25 x 70 bolts complete
with 2 x washers and 1 x nut per bolt.
Repeat for the other side.
19. Torque the bolts starting with the side arms to
the chassis rail (LH and RH sides) followed by
the side arms to the crosstube (LH and RH
sides).
BOLT TORQUE: 125Nm
20. On the outside underside of the bumper,
locate the bumper centre line, mark out and
cut the bumper cut 145mm long (from the
bottom edge, following the curve of the
bumper) x 90mm wide as depicted.
90mm
145mm
EDGE OF BUMPER
