Towbar Fitting Instructions
To Suit
MAZDA CX-9 TC CL4
Part Number
QTMA660L
Rating
2000/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 3 Issue Date: 24-01-2017
1. Open rear door to expose the screw covers for
the lights and the bumper.
2. Remove the covers (3 x LH and 3 x RH)
3. On LH side, remove 2 x screws securing the
rear lights.
4. Remove the 2 x screws securing the bump.
5. In LH wheel arch remove 3 x scrivets, 2 x
screws and 1 x plastic nut securing the
bumper and plastic protector.
Repeat for the other side.
Repeat for the other side.
