Towbar Fitting Instructions
To Suit
MAZDA CX-9 TC CL4
Part Number
QTMA660L
Rating
2000/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 6 Issue Date: 24-01-2017
13. On LH side chassis frame, remove the wiring
harness clip from the chassis.
14. Remove the tape to expose the 2 x towbar
mounting hole positions.
15. Clean the chassis frame side of excessive
sealant using a scraper.
Repeat for the other side.
16. Drop the exhaust by removing the 4 x hanger
bracket rubbers (2 x LH and 2 x RH side).
Support the exhaust with a strap.
17. Loosely secure the LH side arm to the LH
chassis rail with 2 x M12 x 1.25 x 35 complete
with 1 x washer.
Attach the harness to the LH side arm lug with
a cable tie (not supplied).
Repeat for the other side.
