should pull out the charger plug, especially in hot weather.
The charger will become warm during charging, so keep charger away from any heat
source. Please always keep the charger dry and clean. The electronics inside contain
high voltage, so please don't disassemble the charger by yourself.
After charging, please pull the input plug out of the electrical outlet first, and then pull
out the output connecting plug from the battery case. Do not let the charger plugged
into the battery or electrical outlet for a long time, which may damage the charger and
cause the fire.
While charging, please keep it out of the reach of children. Do not put anything on top
of the charger when in use, and prevent any liquid, metal or metal fillings to permeate
into the charger.
You can also remove the battery from the bike and then charge it.
Do not touch any poles in the battery case with your hands when the battery is removed
for charging. Also the charging connector poles cannot be touched with any metal or
any other material that conducts electricity, otherwise it may cause short circuit.
If you don’t ride your bike for a long time, the battery should be charged at least one
time per month. This will ensure the battery life. DO NOT use in the state of low battery
capacity. Do not leave your battery in a fully discharge state for long periods of time.
The battery will continue to self-discharge, resulting in damage.
Avoid any contact with water when charging your battery. If a plug or socket gets wet,
dry it completely before using.
When charging, if there is a peculiar smell or the temperature is extremely high, please
stop charging immediately and send to the local distributor or to the Customer Service
Center.
WARNING: rechargeable batteries are only to be charged under adult supervision.
Always disconnect your electric motor bike from the charger before cleaning with
liquid.
NOTE: Chargers have built-in over charge protection to prevent battery from being over
charged. Charger will get warm during use, this is normal for some charges and is no
cause for concern. If your charges does not get warm during use, it does not mean that
it is not working.
Be sure to properly align the groove on the charger input port with the corresponding
socket on the vehicle and tighten threads; otherwise, no charging action will occur.
