OmniCounter
OmniCounter
Wireless
Wireless
Infrared People Counter
Infrared People Counter
Model: OmniCounter
Model: OmniCounter
Traf-Sys/Walker Wireless, Inc | 190 Industry Drive – Pittsburgh, PA 15275
Page 4 of 9
Ph: 888-815-6568 | Fax: 928-222-7279 |
www.trafsys.com
Mounting Bracket
You should decide what mode you are going to use your counters in before hanging
the mounting brackets. You will want to mount each mounting bracket (shown below)
with snap lock facing up for front firing mode to allow for proper orientation and
sensor operation. For side
firing the bracket will have
one snap lock facing up and
the other facing down to
allow for proper orientation
and sensor operation. For
dual (directional) mode the
brackets need to be mounted
horizontally. Both of the
brackets will have the snap
lock facing the inside of the
door to allow for proper
orientation and sensor operation.
After mounting the brackets, your Omni Counter sensors simply slide onto the Slide
lock and then snap securely onto the Snap lock. The following guide will help
illustrate the process.
Figure 1 Figure 2 Figure 3
Figure 1: Grasp the sensor firmly and line it up with the Slide lock.
Figure 2: Slide the sensor onto the Slide lock.
Figure 3: Begin to push the sensor towards the Snap lock until it snaps into place.
