Trafox SUPERINTEND IM-01.IND, Instructions For Installation And Use Manual, Page: 35 / 50

Superintend IMD © Copyright Muuntosähkö Oy - Trafox 35
http://www.trafox.fi
recovered to the correct level;
the M1 and M2 connections to
the network to be measured
have been restored.
Too much noise [ N %][ L %]
The insulation resistance
measurement continuously has
a noise level too high (N)
whereas the alarm limit is
L .
Noise normal level
The noise level of the
insulation resistance
measurement has returned to
normal.
PE Alarm ON [PE XX CH CC ][ N ][ L ]
The resistance fault of channel
CC of the PEC-01 unit in the PE
address of XX has been
activated with value N ,
whereas the limit value has
been
L .
PE Alarm OFF [PE XX CH CC ]
The resistance fault of channel
CC of the PEC-01 unit in the PE
address of XX is no longer
active.
PE Alarm Acknowledge [PE XX CH CC ]
The resistance fault of channel
CC of the PEC-01 unit in the PE
address XX is no longer active.
The alarm was acknowledged
manually.
Alarm Limit changed [PEresist] [ L1 %]->[ L2 %]
The limit value of the
resistance fault of the PEC-01
units was changed from
L1 to
L2.
Missing TC Alarm ON [TC XX ]
The TC-01 unit configured in
the TC address
XX is not
responding.
Missing TC Alarm OFF [TC XX ]
The TC-01 unit configured in
TC address
XX is responding
again or has been removed.
Missing TC Acknowledge [TC XX ]
Identification or removal of the
TC-01 unit from the TC
address
XX was acknowledged
manually.
TC Unit Removed [TC XX ]
The TC-01 unit configured to
TC address
X X has been
removed from the network.
TC Unit Added [TC XX ]
The TC-01 unit has been added
to TC address
XX .
Missing IC Alarm ON [IC XX ]
The IC-01 unit configured in
the IC address
XX is not
responding.
Missing IC Alarm OFF [IC XX ]
The IC-01 unit configured in IC
address
XX is responding
again or has been removed.
Missing IC Acknowledge [IC XX ]
Identification or removal of the
IC-01 unit from the IC address
XX was acknowledged
manually.