7
7
Back Panel
Power Switch:
Press the power switch to (I)
turn the power on. Within 10-20 seconds, as the
heaters reach operating temperature the tubes
will begin to glow a soft orange light. Press the
power switch to (0) to turn the unit off. As the
heaters cool off, the orange glow will slowly dis-
appear.
It is normal for a vacuum tube equipment
to run warm if used for prolonged periods.
Tubes are operating at much higher tempera-
ture and should not be touched for at least
ten minutes after the unit is turned off to pre-
vent burns.
Always place your amplifi er away from chil-
dren and pets to prevent burns.
Audio signal connection jacks
- Use these
jacks to connect the audio interconnects from
your components to the amplifi er.
Speaker terminals
- Your amplifi er has two out-
put channels, the Right Output and the Left Out-
put.
Each output channel is designed to handle one
speaker. Follow the instructions outlined in the
Operating Procedure for the correct speaker
connections.
Trafomatic Audio
Trafomatic Audio
7
7
7
7
7
7
Controls and Their Functions
