4
4
4
ENVIRONMENT
1) Water and Moisture
Do not use this product near water - i.e. near a bath-
tub, ash bowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool or the like. Damp
basements should be avoided.
2) Heat
The product should be situated away from heat sourc-
es such as radiators, heat registers, stoves or other
appliances that produce heat. Also avoid putting the
unit in the direct rays of the sun.
3) For indoor use only.
PLACEMENT
1) Accessibility
It is normal for a vacuum tube power amplifi er to run
warm if used for prolonged periods. Tubes are very
hot when operating and should not be touched for at
least ten minutes after the unit is turned off to pre-
vent burns. Always place your amplifi er away from
children and pets to prevent burns.
2) Ventilation
This product should not be placed in a built-in installa-
tion or rack unless proper ventilation is provided or
the manufacturer’s instructions have been followed.
Never place anything on top your amplifi er that could
obstruct the airfl ow and cause the electron tubes to
overheat and damage the amplifi er. Do not place your
amplifi er in a closed bookcase; overheating could oc-
cur. Ensure that there is at least 8” (200mm) of open
space above the amplifi er.
3) Surface
Place the unit on a fl at level surface. Care should be
taken to prevent objects from falling and liquids from
spilling into the unit. Do not subject the unit to exces-
sive smoke, dust, vibration or shock.
MAINTENANCE
1) Cleaning
Unplug this product from the wall outlet before clean-
ing. Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning. Do not use any type of
abrasive pad, scouring powder or solvent such as al-
cohol or benzene.
2) Tube replacement
Electron tubes have their life in the 2000-3000 hrs
range. We strongly recommend replacing the output
tubes at 20-30 months interval (depending on your
listening habits) and signal tubes at every other pow-
er tube replacement (after 24-36 months). This will
ensure that the amplifi er always performs at its best
and tube failure will not overstress other parts.
3) Biasing the amplifi er
The Experience Elegance amplifi er uses tubes in
self-biasing confi guration and does not require any
adjustments. The only requirement is to ensure that
matched tubes are used in both channels. Matched
tubes are available from multiple vendors as well as
directly from Trafomatic Audio.
SERVICE
1) Replacement Parts
When replacement parts are required, be sure that
the service technician uses replacement parts speci-
fi ed by the manufacturer or parts with the same char-
acteristics as the original part. Unauthorized sub-
stitutions may result in fi re, electric shock or other
hazards.
2) Tube Replacement
Should it become necessary to replace your tubes,
remove the AC power plug from the wall and allow
thirty minutes for the high voltage capacitors to dis-
charge. Follow instructions outlined in this manual.
3) Modifi cations
Modifi cations to the amplifi er are strongly discour-
aged. The unit was designed by experienced engi-
neers and tested for safe and reliable operation. Any
modifi cation may pose a safety problem and result in
reduced lifetime of the product. Any removal of the
cover will void warranty.
Trafomatic Audio
Trafomatic Audio
44
4
4
4
4
4
4
