Opening and Closing the Sign
Opening and Closing the Sign
Every SafePace EV15SD sign has two doors on the back of the sign that you can use to access the
batteries, controller card and solar charger. These doors also help to protect the internal components of the
sign from vandalism as well as water infiltration. There are two locks on each door. A key for these locks
will have been included with your sign.
Figure 9: Rear doors of the sign enclosure
The following procedures provide details on how to properly open and close, the doors on the signs.
W
ARNING
:
It is vitally important, whenever you close the sign, that you close and lock
all
of the latches
properly to avoid water infiltration as this could damage the sign and void your warranty.
To open the door:
1.
Insert the supplied key to open each of the locks in turn.
2.
Pull the door open.
To close and lock the door:
1.
Push the door closed.
2.
Use the supplied key to lock each of the locks in turn.
SafePace® Evolution 15SD Installation Manual
p. 21
