Mounting SafePace EV15SD Signs
Mounting SafePace EV15SD Signs
The SafePace EV15SD sign includes a Pole Banding Mounting system. This is a fairly simple type of
mounting and it requires no special knowledge to easily install the sign.
Installing the Pole Bracket
You can install the Pole Bracket on any type of standard pole with the included banding straps.
T
IP
:
We recommend that you install the bracket on a 3.5-inch or larger pole.
Figure 3: Pole bracket mounted
To install the Pole Bracket using the supplied banding straps:
1.
Thread the banding straps through the banding strap holes as shown.
N
OTE
:
The banding straps included are long enough for use with a 5-inch pole. If you want to use a
larger pole, you will need to obtain longer banding straps.
2.
Place the bracket against the pole and tighten the straps with a nut driver until secure.
Mounting and Dismounting the Sign
After you install the pole bracket, you can easily mount the SafePace EV15SD sign by sliding it down onto
the Pole Bracket. When the sign is mounted, you should lock it into place.
SafePace® Evolution 15SD Installation Manual
p. 11
