Operating Your Sign
Operating Your Sign
After your sign is mounted and powered, you can connect to, and manage, it via Bluetooth with our easy to
use SafePace® Pro application. You can also manage your sign remotely using SafePace® Cloud, if you
purchased that option.
For more information on operating your sign with SafePace® Pro, refer to the
SafePace® Pro User Manual
.
For more information on operating your sign with SafePace® Cloud, refer to the
Web Director User Guide
.
T
IP
:
You can get the latest version of all manuals at:
http://www.trafficlogix.com/customerarea/customerdownloads.
Resetting the Sign
There is no ON/OFF switch supplied with the SafePace EV12 sign. The sign immediately powers on once
the power source is connected. There is also no reset button on the controller card included with this sign.
As a result, we recommend that you use the following procedure to turn the sign OFF and ON, or reset the
sign.
To reset the sign:
1.
Open the sign enclosure.
On the inside of the front panel you will see the controller card and below it two green plugs. One of
these is wired to the controller card, the other is wired to the power source.
2.
Disconnect the lower of the two plugs, the one which is wired to the power source. This turns the sign
off.
SafePace® Evolution12 Installation Guide
p. 32
