14
3
Once your grill is on and the home
screen is displayed, choose one of
these four options to cook your food:
Cooking at a Single Temperature,
Using a Preset Custom Cook Program,
Creating a Custom Cook Program, or
Cooking With the Probe. Each method
is fully explained in the next section,
"Choosing a Cook Method".
You will need to start with these two steps every time you use your grill.
NOTE: Whenever your grill is not in use, it should be disconnected from the electrical outlet; if left connected
to the outlet, the Main Power switch should be flipped to OFF (O).
USING YOUR GRILL
WARNING!
•
When operating this grill, maintain a minimum clearance of 12 inches (30 cm) from grill to combustibles.
•
Use ONLY TRAEGER BRAND HARDWOOD PELLETS, which are specifically made to work in our grills.
Never use heating fuel pellets in the grill.
1
Plug power cord into an appropriate
grounded/earthed electrical outlet
and flip Main Power switch to ON (
I
).
2
Push Standby button to wake the grill.
NOTES:
•
The Traeger App for your mobile
device makes operating your
electronic controller even easier.
For more information on downloading
the app and how to use it, refer to your
Traeger App Quick Start Guide.
•
Whatever cook method you choose, once
you press IGNITE, your Timberline Grill
will always begin with an ignition and
preheat cycle and end with a 10-minute
shut-down. When creating a Custom
Cook program, those cycles will run
automatically; you will not have to
program them.
•
We recommend you clean the grease drip
tray frequently to reduce the possibility of
a grease fire. Please see "Maintaining Your
Grill" for more details.
Plug appearance may vary by region.
66106_Timberline_UCG_v14.indd 14
9/9/16 9:03 AM
