traegergrills.com
|
21
ALL NA
TURAL
HARDWOOD
HOPPER CLEAN-OUT
Your Traeger Timberline Grill has a hopper clean-out system that allows you to quickly
change from one pellet flavor to another without making a mess.
1
Turn the Main Power switch to
OFF (O) and disconnect the power
cord. If the grill is still hot, allow
it to cool completely.
2
Place a container large enough to hold
the discarded pellets under the pellet
clean-out door.
TIP: A clean 5-gallon bucket works great!
3
Unscrew the clean-out door fastener and
open, allowing the pellets to empty into
the container below it. You might need a
spatula or spoon to push the remaining
pellets out of the hopper.
NOTE: The pellets remaining in the auger
do not need to be removed; they will burn
through during your next warm-up cycle.
4
Once the hopper is empty, close the
door, replace the fastener, and refill
the hopper with a different flavor of
Traeger Hardwood Pellets.
Plug appearance may vary by region.
66106_Timberline_UCG_v14.indd 21
9/9/16 9:03 AM
