Traeger BBQ020LE, Owner'S Manual

Page: 4 / 18

SECTION ONE: ASSEMBLY INSTRUCTIONS
MOUNTING THE HANDLE TO THE LID:
1. Insert .250 lock washer (19), .250 flat washer (18) onto 1/4-20 bolt (17) and insert into
hole on the inside of the lid. Then align the handle to the screw and insert into threaded
hole and leave loose. Repeat the process on the other side of the handle.
2. Then tighten the bolts till they are snug. Do Not Over Tighten The Bolts.
INSTALLING THE DRIP PAN ASSEMBLY AND GRILL:
1. Insert the drip pan assembly (41) onto the inside of the BBQ020LE body and insert into
the body cutout.
2. Insert the drip pan support into the alignment brackets this will create a lean towards the
back of the grill body.
3. Insert the Grill (58) into the recessed body inserts with the 3 parallel bars onto inserts.