tradetested GS506-V1, Owner'S Manual And Assembly Instructions

Page: 15 / 21

To form a flush corner, make
sure flaps overlap.
10
OPTIONAL
- Once you have all four walls up and secure, we suggest that you run sealant
between the overlapping panels on each corner of the shed. This will protect it from
heavy weather. Afterwards, tack the sheets together down the length of each corner.
Corner
Anchor x8
S
TEP
7
i
To form a flush corner connection, make sure the
end corrugations overlap as shown above.
When adding the lower corner brackets, place a spirit
level or block of wood underneath the corner of the
shed. This will ensure that the two walls being
connected stay square as you drill the screws in.
Constructing the walls
Tek Screw